Το Springer Fork εξαφανίστηκε από τη νέα σειρά του Harley το 2011.
Μετά από αυτό, η τροφοδοσία ως εξαρτήματα επισκευής OEM του Harley ολοκληρώθηκε και τελικά έγινε κομμάτι φάντασμα.
Ως εκ τούτου, PLOT συγκεντρώνει τις τεχνολογίες που καλλιεργούνται στην ανάπτυξη της SpringHer για RoadHopper και εγκαινιάζει ένα νέο Springer Fork.
`` Κάνε πράγματα που δεν υπάρχουν. '' `` Αν θέλετε να κάνετε κάτι πέρα από το Original ''
■ Ο πρωτότυπος σχεδιασμός αναπαράγει πιστά κάθε λεπτομέρεια.
Τόσο το FType L όσο και το FXType αναπαράγουν πιστά το αρχικό DesignDimension.
Το πιο σημαντικό σημείο είναι ο τρόπος σύνδεσης του MainLeg.
Είναι μια σύνδεση συγκόλλησης παρά μια συγκόλληση που είναι κοινή σε άλλα προϊόντα μάρκας.
Δεν υπάρχει διαφορά στη δύναμη και καταστροφική δοκιμή που συνεχίζει να ισχύει μέχρι να επιβεβαιωθεί η παραμόρφωση και επιβεβαιώνεται ότι έχει αντοχή μεγαλύτερη από την αρχική.
Επιπλέον, ο κορυφαίος σφιγκτήρας, ο βραχίονας χειρισμού, ο αμορτισέρ, η υποστήριξη δαγκάνας, ο άξονας Shaftetc.Το εξάρτημα γύρω από το κιτ συμπεριλαμβάνεται στο κιτ για ομαλή τοποθέτηση.
・ Δύο χρώματα του Chrome και του Μαύρου
Δύο τύποι ομορφιάς επίστρωσης χρωμίου και μαύρης στρώσης σκόνης έχουν ρυθμιστεί. Παρακαλούμε επιλέξτε σύμφωνα με το εγκατεστημένο μοντέλο.
・ Μέρη γύρω από το Stem
Ανυψωτήρας χειρολαβής, Κορυφαίος σφιγκτήρας, Στέλεχος Nutetc. Είναι τυποποιημένος εξοπλισμός.
・ Σύνδεση MainLeg συγκόλλησης
Μια συγκολλημένη σύνδεση που αναπαριστά την αρχική εμφάνιση, συνδυάζοντας τόσο τη δύναμη όσο και τον κλασσικό σχεδιασμό.
·Αμορτισέρ
Τα χαρακτηριστικά διαδρομής διαφέρουν ανάλογα με τη διάσταση στο FType L / FXType.
Βασικός εξοπλισμός Αμορτισέρ με απόσβεση που προσαρμόζεται σε κάθε χαρακτηριστικό.
· OEM για υποστήριξη CaliperCaliper
OEM για στήριξη δαγκάνας δαγκάνας, ράβδος ροπής ως βασικός εξοπλισμός.
Απόδοση και ευκολία που υπερβαίνουν το πρωτότυπο
・ Έχοντας ενσωματωμένο βραχίονα κλειδώματος
Σφαιρικό έδρανο στην άρθρωση και του εμπρός ποδιού (Σφαιρικό έδρανο) Με την υιοθέτηση, η ομαλή κίνηση του Locker Arm πραγματοποιείται.
Επιπλέον, η κύρια πλευρά HARLEY-DAVIDSON FXCW 1584 ROCKERBolt δεν χρειάζεται να σφίγγεται, βελτιώνοντας τη συντηρησιμότητα.
Ο αρχικός μηχανισμός PLOT δημιουργήθηκε από τον Springer Fork για το RoadHopper.
・ Κλειδαριά χειρολαβής για έκκεντρο EVO / Twin
Ο άξονας του στελέχους έχει προεπεξεργαστεί έτσι ώστε η κλειδαριά χειρολαβής OEM του EVOFrame και του Twin camFrame να μπορεί να χρησιμοποιηθεί όπως είναι.
Επιπλέον, το PadlockType μπορεί να υποστηριχθεί με την τοποθέτηση του παρεχόμενου βραχίονα.
Συμβατό με όλες τις δομές κλειδώματος χειρολαβών που διαφέρουν ανάλογα με το έτος και τις προδιαγραφές.
The Springer fork disappeared from Harley new availability after 2011.
After that, the supply as a stock Harley repair part was ended, and it became a phantom part at last.
Proto brings together the technologies cultivated through the development of the Springer fork for road hoppers and introduces a new Springer fork to the world.
"If you're going to make something, make it better than the original.
■Faithful reproduction of the original design to the smallest detail.
Both FL type and FX type are faithfully reproduced with the original design and dimensions.
Particularly focused on the way the main legs were connected.
The connection is brazed instead of welded as is common with aftermarket parts.The caulking process to fill the gaps in the connections is also a point well known to many.
Through destruction tests to check the strength of the product, it was discovered that this product is so much stronger than the original.
Top clamp, handlebar riser, shock absorber, caliper support, axle shaft and other peripheral parts are included in the kit for smooth installation.
・Available in two colors: chrome and black
Available in beautiful chrome or black powder coat.Please choose the one that best suits your model.
・Stem peripheral parts
Handlebar risers, top clamp, stem nut, etc. are as standard equipment.
・Main leg brazed connection
Brazed connections to recreate the look of the original.It has both sufficient strength and classic design.
・Shock Absorber
FL type and FX type have different stroke characteristics due to the difference in dimension.
Shock absorbers with damping performance tailored to each characteristic are as standard equipment.
・Caliper support for stock caliper
Caliper support for stock caliper, torque rod is standard equipment.
■Performance and convenience beyond the original.
・Rocker arm with built-in bearing
Spherical bearings are used at the joints of both front and rear legs to ensure smooth movement of the rocker arms.
In addition, the main rocker bolts do not need to be tightened and adjusted, which improves serviceability.
This is Proto's original mechanism established in the springer fork for road hoppers.
・Handlebar lock for EVO and Twin Camshaft
The stem shaft has been pre-machined to allow the use of the stock handlebar lock on EVO and Twin Camshaft frames.
The padlock type is also available by attaching the attached bracket.
It is compatible with all handlebar lock constructions, which are different depending on model-years and markets.