■ Γιατί είναι απαραίτητο;
Πώς να συνδυάσετε τα αντιφατικά θέματα "αποτελεσματικότητα ψύξης" και "απόδοση προστασίας".
Μικρές πέτρες και σκουπίδια τυλίγονται από το εμπρόσθιο ελαστικό, τα έντομα που φέρουν στο φως ... και τα λοιπα. και τα λοιπα
Αυτά δίνουν ζημιά στον πυρήνα του καλοριφέρ από πτερύγια αλουμινίου.
Η επίδραση ψύξης χάνεται με τη σύνθλιψη των πτερυγίων και σε ορισμένες περιπτώσεις με τον κίνδυνο να καταστραφεί το WaterLine και να προκληθεί διαρροή ψυκτικού υγρού ...
Χαρακτηριστικά του εργοστασίου Etching
Ο πυροσβεστικός πυροσβέστης του εργοστασίου Etching έχει επανειλημμένα δοκιμαστεί αρκετές φορές γύρω από τον αγώνα οδικής διαδρομής μέσα στο καλοκαίρι των 8 ωρών που μπορεί να ονομαστεί το πιο σκληρό για το Radiator.
Η διάταξη του MeshPattern, το πάχος του MeshLine και ο λόγος του ανοίγματος είναι γεμάτοι με την τροφοδοσία πίσω από τη σκηνή φυλής.
Το κεντρικό τμήμα είναι εντάξει, και τα δύο SIDE είναι χονδρό HexagonalMeshPattern.
Αυτό εγγυάται ότι η Μικρή πέτρα και τα Σκουπίδια που ήταν SpinOffed από το Εμπρόσθιο ελαστικό είναι ωραίες φρουρές του κεντρικού τμήματος που ταιριάζουν με το πλάτος των ελαστικών.
Και τα δύο χονδροειδή μάτια του SIDE έχουν λόγο ανοίγματος που λαμβάνει υπόψη τα αντικρουόμενα θέματα της "απόδοσης ψύξης" και της "απόδοσης προστασίας".
Υπάρχει επίσης ένας λόγος για την επιλογή του υλικού.
Για αλουμίνιο ή τιτάνιο, χαμηλώστε το πάχος (Μείωση αντοχής) Το πλάτος MeshLine που μπορεί να υλοποιηθεί μόνο από ανοξείδωτο χάλυβα (SUS3040.5t) Με την υιοθέτηση αυτή πραγματοποιήθηκε χωρίς μείωση της αντοχής με το ιδανικό πλάτος γραμμής.
Με βάση αυτά, ο προφυλακτήρας πυρήνα δεν έχει μόνο ως στοιχείο για τη διατήρηση της απόδοσης, αλλά και ένα εφέ ντύνομαι που αδιαφορεί για την ομορφιά.
Σας συνιστούμε με σιγουριά για την Μεγάλη Μηχανή σας.
■Why is this necessary?
How do we balance the conflicting themes of "cooling efficiency" and "protection performance"?
Pebbles and garbage rolled up from the front tire, insects flying at the light..etc
These will damage the radiator core which is made up of aluminium fins.
When the fins are crushed, the cooling effect is lost, and in some cases, the water line may be damaged, causing a coolant leak...
■Features made by Etching Factory
The radiator core guard of the etching factory has been tested many times mainly in the 8 hours endurance road race in the midsummer which is the most severe for the radiator.
The placement of the mesh pattern, the thickness of the mesh lines, and the aperture ratio are all based on feedback from the racing scene.
Fine mesh pattern in the center and coarse mesh pattern on both sides.
This ensures that pebbles and debris spun off from the front tire are guarded by a fine mesh in the center that matches the width of the tire.
The coarse meshes on both sides are designed with an aperture ratio that takes into account the conflicting themes of cooling efficiency and protection.
■There is also a reason for the choice of material.
In the case of aluminum or titanium, the mesh line width can only be achieved by lowering the plate thickness (lowering the strength), but by using stainless steel (SUS3040.5t), the ideal line width can be achieved without lowering the strength.
Based on the above, the core guard is not only an item to maintain the performance of the vehicle, but also has a dress-up effect to show off the beauty of the vehicle in a casual manner.To protect, to charm.
It is recommended with confidence for your valuable machine.