Ήταν καλά δεκτή "Τριπλό δέντρο" Lineup ως Τύπου 2 με την αλλαγή θέση βίδα για να σφίξετε το τμήμα Fork της Top Bridge!
Με την αλλαγή της θέσης του μπουλονιού, μπορεί να χρησιμοποιηθεί το κιτ χειρισμού K-FACTORY Φ43.
Κατά την οδήγηση με μεγάλη ταχύτητα με ελαστικό υψηλής πρόσφυσης (Κύκλωμα) Ένας από τους παράγοντες θολώματος στο τριπλό δέντρο μπορεί να είναι ανεπαρκής δύναμη.
Αν και είναι κάπως ανακουφισμένος από τον Σταθεροποιητή και τον Κλαδευτή, δεν είναι μια θεμελιώδης λύση.
Η NORMAL συνειδητοποιεί την υψηλή ακαμψία και το μικρό βάρος, κόβοντας το τριπλό δέντρο στέλεχος, κάτω από το βραχίονα με ξύρισμα αλουμινίου, το οποίο δυσκολεύει την ακαμψία.
Η ποσότητα μετατόπισης είναι επίσης 30 mm ως πρότυπο, μπορείτε να επιλέξετε 28 mm · 32 mm χρησιμοποιώντας το χρώμα επιλογής, είναι δυνατή η επιλογή 3 θέσεων.
Είναι δυνατή η προσαρμογή ανάλογα με την ιππασία με βάση την ίδια διάσταση όπως η ΚΑΕ.
Το ύψος του περονιού είναι 205mm, η διάμετρος του κράνους Fork είναι Φ 43mm, η OEMFork καθώς και το OHLINS που ανεγείρεται Fork κλπ. Φ 43mm Fork μπορεί να εγκατασταθεί.
Έχουμε δύο τρύπες βιδών στο μπροστινό τμήμα του κάτω βραχίονα έτσι ώστε να μπορεί να εγκατασταθεί το Joint for branching. (M6XP = 1,0 Διάμετρος βίδας: 46mm)
Βύσσινο Stem, Post Handlebar περιλαμβάνονται επίσης στην αρχή.
Το πώμα χειρολαβής και η κλειδαριά χειρολαβής είναι επίσης διαθέσιμα και προσαρμόζονται στην επιλογή Offset.
Φέρει · Σφράγιση σκόνης συμπεριλαμβάνεται επίσης.
Τα τελειώματα είναι μαύρα ανοδιωμένα και ασημένια ανοδιωμένα.
The bolt position to tighten the fork part of the "Triple Tree" top bridge was changed, and it is lineup as Type2!
By changing the bolt position, it is possible to use K-FACTORY Φ43 universal handle kit.
One of the reasons for shaking at high speed (circuit) with high grip tires is the lack of strength of the triple tree.
Sway bar or steering damper can reduce the problem slightly, but it is not a fundamental solution.
The stock triple tree with the little concern of rigidity replaced with a stem shaft and under bracket are machined aluminum to reduce the weight and realize stiffness of the stock triple tree.
The standard offset is 30mm, and by using the optional collar, 28mm and 32mm can be selected, and 3 positions can be selected.
It is based on the same dimensions as the stock and can be adjusted to suit your riding style.
The fork pitch is 205mm, the fork clamp diameter is Φ43mm, and it is possible to install not only stock forks but also Φ43mm forks such as Ohlins upright forks.
There are two threaded holes on the front part of the under bracket so that a joint for splitting the front brake hose can be attached.(M6 x P=1.0 Screw pitch:46mm)
Stem nut and handle post are also machined.
Handle stoppers and handle locks are also available and can be adjusted to suit the offset.
Bearings and dust seals are also included.
Available in black anodized aluminum and silver anodized aluminum.