[Υλικό / Υλικό] Chromoly Steel (Επίστρωση 3 στρώσεων)
[Σχετικά με την εγκατάσταση]
* Ο άξονας του άξονα είναι ένα σημαντικό κομμάτι.
Οι εργασίες τοποθέτησης πρέπει να γίνονται από εξειδικευμένο προσωπικό στο Pro Shop.
· Εργαστείτε με το κατάλληλο εργαλείο κατάλληλο για το σχήμα άξονα του άξονα.
Αν σφίξετε χρησιμοποιώντας ένα λάθος εργαλείο, οι γρατσουνιές στην επίστρωση που εφαρμόζεται στην επιφάνεια του άξονα μπορεί να προκαλέσουν σκουριά.
· Παρακαλώ ψεκάστε το γράσο κλπ. στην επιφάνεια του άξονα πριν την εγκατάσταση.
Στην επιφάνεια του φρεατίου, η αρχική επίστρωση KOOD "Επίστρωση επίστρωσης τριών στρωμάτων" Εφόσον εφαρμόζουμε, η σκουριά δεν συμβαίνει από τον ίδιο τον άξονα σε κανονική χρήση για την αποτροπή της σκουριάς λόγω διαφοράς μεταλλικών δυνατοτήτων, από τα έδρανα τροχών και ούτω καθεξής .
· Παρατηρήστε τις καθορισμένες τιμές του κατασκευαστή για ροπή σύσφιξης.
· Για οχήματα που πρόκειται να τοποθετηθούν με γνήσια παξιμάδια, επιβεβαιώστε το περικόχλιο.
Σε περίπτωση γρατζουνιών που προκαλούνται από την πτώση κλπ. και φθορά του τμήματος λειτουργίας αυτόματου κλειδώματος στο περικόχλιο, βεβαιωθείτε ότι χρησιμοποιείτε το καινούριο παξιμάδι για να αποφύγετε τη ζημιά στο τμήμα του κοχλία του άξονα.
[Σχετικά με την ποιότητα του προϊόντος]
· Για τη διαχείριση των προϊόντων, την κατασκευάζουμε και τη διαχειριζόμαστε σε ένα τέλειο σύστημα, αλλά παρακαλούμε επικοινωνήστε μαζί μας πριν από την εργασία εάν έχετε πρόβλημα με κάθε ευκαιρία.
* Σε κάθε περίπτωση, εγκατάσταση (Όπως πέρασμα ενός άξονα μέσω ενός τροχού) Δεν μπορούμε να απαντήσουμε σε καταγγελίες και να επιστρέψουμε τα αγαθά μετά την εργασία καθόλου.
· Σχετικά με τη σκουριά
Στον άξονα που κατασκευάζεται από την KOOD "Τριφασική επίστρωση επίστρωσης" Εφαρμόζουμε.
Δουλεύουμε σκληρότερα από τα συνήθη επιχρίσματα επίστρωσης. Επειδή η σκουριά μπορεί να συμβεί ανάλογα με την κατάσταση χρήσης, δεν υπάρχει πρόβλημα στην ποιότητα.
・ "Μεταφορά σκουριάς" ... Η σκουριά από την εξωτερική πλευρά εισχωρεί στην επιφάνεια επιμετάλλωσης
・ Επίστρωση επίστρωσης βλάβη ... Χρήση λανθασμένου εργαλείου, σκαλοπάτι ή πτώση κατά τη διάρκεια της λειτουργίας
* Σημειώστε ότι η σκουριά δεν καλύπτεται από διασφάλιση ποιότητας.
* Σημειώστε ότι οι προδιαγραφές του προϊόντος ενδέχεται να αλλάξουν λόγω κατασκευαστών.
[Material] Chromoly steel (3-layer plating finish)
Without plating nut
*There may be changes in product specifications due to the manufacturer's reasons.
*Even if the vehicle is compatible, it will not fit if the front forks are not stock or if the vehicle has been customized.
[About the installation]
*Axle shafts are critical parts.
Installation must be carried out by qualified personnel at a professional shop.
・Please use the appropriate tool for the head shape of the shaft.
If the shaft is tightened with an inappropriate tool, the plating film on the shaft surface will be scratched and rust will be caused.
・Before installation, apply grease or other oil to the shaft surface.
The surface of the shaft is treated with KOOD's original "3-layer plating film", so rust will not occur on the shaft itself under normal use.The purpose is to prevent rust transfer from wheel bearings, etc., which is caused by the potential difference of metals.
・Please observe the tightening torque specified by the manufacturer.
・If the vehicle is installed using the stock nut, please check the nut.
If the nut is damaged by tipping over, etc., or if the self-locking part is worn out, be sure to use a new nut.This is to prevent damage to the shaft threads.
[About Product Quality]
・KOOD has taken all possible measures to manage the production. However, if there is any problem, please contact KOOD before the work.
*In no event will KOOD accept any claims or returns after the installation (such as threading the shaft into the wheel).
・About rust
KOOD shafts are treated with a "3-layer plating film".
It is processed with a stronger film than normal plating film.Rust may occur depending on the usage conditions, but there is no problem with the quality.
・Transferred rust: Rust from the outside gets on the plated surface
・Damage to the plating film... Improper use of tools, flying rocks during riding, falls, etc.
[Caution]
In case of KOOD shafts with plated nuts, damaging the threads during installation often happens.
Due to the nature of plating, this is often seen when the plated parts (e.g. KOOD shaft and KOOD nut) mesh with each other or when the threaded part is greaseless.
Please use an anti-corrosive grease such as sledge compound on the screw part when you install it.