Performance Damper
Product # 1WS211H00000
205.33 EUR (33,465 γιέν)
List price: 205.33 EUR Save 0%
+335 σημείο Webike (2.05 EUR)
Temporarily out of stock. |
Arrival date at our warehouse: γύρω 1 και μισό μήνες? |
Product # 1WS211H00000
205.33 EUR (33,465 γιέν)
List price: 205.33 EUR Save 0%
+335 σημείο Webike (2.05 EUR)
Temporarily out of stock. |
Arrival date at our warehouse: γύρω 1 και μισό μήνες? |
Model Page Links
4 / 5
4 κριτικές
It feels like the performance of the suspension has improved compared to before installation. Even if it passes through a gap, the time it decays is quite short and comfortable. It's hard to feel the effect on a good road surface such as a highway, but it's great when touring on a general road.It is attached to the side of the frame, but it does not interfere with the knee when attached with the MT07.View Detail
I was told it would improve the vibration of the car when it was running, so I installed it.
As others have written, I'm not sure about it at low speeds, but I felt that the Motorcycle got a little classier at high speeds when it sped up to 90+ km/h....
Considering the price, I don't think it's a good cosmetic product. It wasn't as good as I was expecting and I don't think I would have bought it if I had known how it would feel before I bought it.View Detail
【attachment】
It's not so difficult if you follow the Instruction Manual. However, don't forget the instructions for applying Locktite.
[Looks]
There's a great sense of retrofitting. In addition, Body. "PD. The design of the words "I'm not a fan of this game," and the design of the words "I'm not a fan of this game," give a very cheap impression. The design of the design is very cheap and I would like to request for improvement. It would have been better if they had only used a tuning fork mark.
Performance
It's a strange ride. The ride is noticeable at high speed and the ride becomes mellow.
On the other hand, there is no significant change in the low speed range.
Also, I feel the vibration of the Handlebar is reduced. My car has changed the weight of the handlebar to a lighter one, so the vibration was terrible, but I feel that it will become mellow again by installing it.
【Review】
While I think the Brushbo effect is probably partly to blame, I think high speeds are much less tiring. Personally, I felt it was a good idea. I also think it would be best if the price was a little lower.View Detail
I was inspired to put it on by Minyuu
My MT-07 with a European Yamaha Moto CageRoll bar and Frame I am raising the rigidity, but as far as the Left Side is concerned, it is a performance damper Since it is not possible at this time to use the Both sides have roll bars When The Right Side has a roll bar, the Left Side has a Performance damper (hereafter PD) only This is a comparison with the state of the art
Switching from Roll bar to PD will definitely reduce the stiffness It becomes softer at the Level you notice as soon as you start riding around town, so if you turn it around, the Roll So the bar was pretty much contributing to the stiffness increase
Because MT-07 is TWIN, there is a lot of vibration, and in my case, the Handlebar is also made of aluminum We had to change it so that even with the Ultra heavy bar end, there were always minute vibrations But when I put the PD on, the vibration was significantly reduced
The stiffness is considerably reduced, but even if you take it into Circuit and repeat rapid acceleration and deceleration, it still fails The roll bar was not done, so the roll bar is still reasonably rigid even if it is on the Right Side It seems that the
The PD is attached to the thicker stays (both front and rear), so this contributes to increased rigidity I thought I might do that, but at least the Stay on the Rear side was just a handful of handfuls to shake I don't think this will have much effect on the rigidity
However, it certainly has the effect of reducing microvibrations and improving ride quality, and the ride quality is definitely improved I did Some people get the effect of a more comfortable → a safer ride → a faster ride I think
If you have already replaced the Handlebar and are having trouble with the slight vibration to the palm of your hand, or if you have some Silky If you want to get closer to a comfortable ride, you can recommend these parts On the contrary Even in 07, we're going to turn Gun Gun Gun and attack the medium and high speed Corners If this is the case, put the Moto Cage Roll bar on first! (Lol)
I would like to devise a way to share the installation method, but I'm not sure if the weld level of the Stay If you can't make your own, it's not going to happen soon
Wobble phenomenon where the Frame gets twisted even at 200km/h Meter reading? I was able to confirm that there is not a thing that happens, so I have to use Left SidePD for a while for touring and I'm going to figure out how to install it with the Roll bar at the same time while enjoying the Circuit run
It's good as a 5 star because the ride is definitely better, but the Circuit Time goes up I lost one star because it fell off slightlyView Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
Notification
Επιλέξτε την επιλογή πριν προσθέσετε στο καλάθι σας.
Εξυπηρέτηση πελατών
ΠΑΡΑΓΓΕΛΙΕΣ
ΠΛΗΡΟΦΟΡΙΕΣ
ΣΧΕΤΙΚΑ ΜΕ ΕΜΑΣ
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.