[Τύπος] Φίλτρο ισχύος
[Spec. ]
Διάμετρος: Φ40
Body Σώμα βάσης: TMR40-D21
Pitch Θέση καρμπυρατέρ: 77-93-77
Εξωτερική Διάμετρος του Πείρου (mm) : 45mm
Μήκος πείρου (mm) : 30mm
RequiredParts] Σετ αναπνοής δεξαμενής λαδιού Yoshimura
Μονωτικό συγκρότημα (40-60)
* Ένα από τα ακόλουθα σετ γκαζιού απαιτείται ως ξεχωριστό μέρος για εγκατάσταση.
YOSHIMURA Βάση γκαζιού Racing για μεγάλο σώμα TMR (L = 950mm)
Απαιτεί ένα από τα ακόλουθα σετ γκαζιού
* Απαιτούμενα μέρη: Σετ δεξαμενών αναπνοής λαδιού Yoshimura.
* Τα απαιτούμενα ανταλλακτικά είναι τα εξαρτήματα που επιβεβαίωσε η Yoshimura Japan κατά την εγκατάσταση.
* Εάν τα γνήσια ανταλλακτικά του κατασκευαστή έχουν διακοπεί, προετοιμάστε τα κατάλληλα ανταλλακτικά.
* Το μήκος του σύρματος γκαζιού είναι για τυπική λειτουργία.
* Ο προσαρμογέας φίλτρου που περιλαμβάνεται σε αυτό το προϊόν είναι αλουμίνιο.
* Λάβετε υπόψη ότι οι προδιαγραφές του προϊόντος ενδέχεται να αλλάξουν για λόγους κατασκευαστή.
[Type] Power filter
[Specification]
・Inner diameter: Φ40
Base body:TMR40-D21
Carburetor pitch:77-93-77
Spigot outer diameter (mm):45mm
・Spigot total length(mm):30mm
[Parts required separately] Yoshimura Oil Breather Tank Kit
Insulator Band (40-60)
*Either of the following throttle holder sets is required as a separate part for installation.
*Yoshimura Racing Throttle Holder Set for TMR Large Body (L=950mm)
・Yoshimura Racing Throttle Holder Set for TMR Large Body with Switch (L=950mm) (Switch side coupler wiring required to be changed)
*Parts required separately:YOSHIMIURA Oil Breather Tank Kit.
*Required parts are the parts that YOSHIMIURA Japan confirmed the installation during the development.
*Please prepare the appropriate parts if stock parts have been discontinued.
*The length of the throttle wire is the standard setting.Please note that it may vary depending on the installation method.
*The filter adapter included with this product is a machined aluminum product.
*There may be changes in product specifications due to the manufacturer's reasons.