Chromoly Steel (Επίστρωση 3 επιπέδων)
[Spec. ] Σετ καρυδιών
* Λάβετε υπόψη ότι οι προδιαγραφές του προϊόντος ενδέχεται να αλλάξουν για λόγους κατασκευαστή.
[Εγκατάσταση]
* Ο άξονας του άξονα είναι ένα σημαντικό μέρος.
Βεβαιωθείτε ότι το εξειδικευμένο προσωπικό εργάζεται στην εγκατάσταση στο pro shop.
Κάντε το χρησιμοποιώντας το κατάλληλο εργαλείο κατάλληλο για το σχήμα κεφαλής του άξονα.
Γδαρμένο στο φιλμ επιμετάλλωσης που εφαρμόζεται στην επιφάνεια του άξονα, προκαλώντας σκουριά εάν σφίξετε χρησιμοποιώντας ένα ακατάλληλο εργαλείο.
Πριν από την εγκατάσταση, ψεκάστε γράσο στην επιφάνεια του άξονα.
Συνήθως δεν προκαλεί σκουριά από τον ίδιο τον άξονα επειδή εφαρμόζει την "διαδικασία επίστρωσης τριών στρωμάτων" του KOOD πρωτότυπου στην επιφάνεια του άξονα. Προκαλείται από τη διαφορά δυναμικού μετάλλου, για να αποτρέψει τη σκουριά από το ρουλεμάν τροχών κ.λπ.
Λάβετε υπόψη τις καθορισμένες τιμές του κατασκευαστή για σύσφιξη ροπής.
Επιβεβαιώστε το παξιμάδι για τα οχήματα που θα τοποθετηθούν χρησιμοποιώντας παξιμάδι OEM.
Βεβαιωθείτε ότι χρησιμοποιείτε ένα νέο παξιμάδι όταν εμφανίζεται στο παξιμάδι, όπως γρατσουνιές που προκαλούνται από πτώση και αυτο-κλειδώματος μέρος λειτουργίας. Αυτό γίνεται για να αποφευχθεί ζημιά στο σπειρωτό τμήμα του άξονα.
[Σχετικά με την ποιότητα του προϊόντος]
Όσον αφορά τη διαχείριση των προϊόντων, κατασκευάζει και διαχειρίζεται σε ένα τέλειο σύστημα, αλλά παρακαλούμε επικοινωνήστε μαζί μας πριν από την εργασία, εάν έχετε πρόβλημα κατά πάσα πιθανότητα.
* Σε κάθε περίπτωση, δεν μπορούμε να απαντήσουμε σε αξιώσεις και προϊόντα που επιστράφηκαν μετά τη δουλειά (όπως το πέρασμα του άξονα μέσω του τροχού) καθόλου.
Σχετικά με τη σκουριά
Ο "άξονας KOOD" έχει υποβληθεί σε "διαδικασία επίστρωσης τριών στρωμάτων".
Έχει ισχυρή επεξεργασία επίστρωσης σε σύγκριση με το συνηθισμένο επίστρωμα. Μπορεί να σκουριάσει ανάλογα με την κατάσταση χρήσης, αλλά δεν έχει σημασία για την ποιότητα.
Είναι "σκουριά" ... σκουριά από τις εξωτερικές βόλτες στην επιφάνεια επένδυσης
Μεταβατική σκουριά. Εξωτερική σκουριά στην επιχρυσωμένη επιφάνεια
Ζημιά στην επίστρωση ... Λανθασμένη χρήση εργαλείων, σκαλοπατιών ή πτώσεων κατά την οδήγηση κ.λπ.
* Η σκουριά δεν καλύπτεται από την εγγύηση.
Ευχαριστούμε για την κατανόησή σας.
[Material] Chromoly steel (3-layer plating finish)
With plated nut
*There may be changes in product specifications due to the manufacturer's reasons.
*Even if the vehicle is compatible, it will not fit if the front forks are not stock or if the vehicle has been customized.
[About the installation]
*Axle shafts are critical parts.
Installation must be carried out by qualified personnel at a professional shop.
・Please use the appropriate tool for the head shape of the shaft.
If the shaft is tightened with an inappropriate tool, the plating film on the shaft surface will be scratched and rust will be caused.
・Before installation, apply grease or other oil to the shaft surface.
The surface of the shaft is treated with KOOD's original "3-layer plating film", so rust will not occur on the shaft itself under normal use.The purpose is to prevent rust transfer from wheel bearings, etc., which is caused by the potential difference of metals.
・Please observe the tightening torque specified by the manufacturer.
・If the vehicle is installed using the stock nut, please check the nut.
If the nut is damaged by tipping over, etc., or if the self-locking part is worn out, be sure to use a new nut.This is to prevent damage to the shaft threads.
[About Product Quality]
・KOOD has taken all possible measures to manage the production. However, if there is any problem, please contact KOOD before the work.
*In no event will KOOD accept any claims or returns after the installation (such as threading the shaft into the wheel).
・About rust
KOOD shafts are treated with a "3-layer plating film".
It is processed with a stronger film than normal plating film.Rust may occur depending on the usage conditions, but there is no problem with the quality.
・Transferred rust: Rust from the outside gets on the plated surface
・Damage to the plating film... Improper use of tools, flying rocks during riding, falls, etc.
[Caution]
In case of KOOD shafts with plated nuts, damaging the threads during installation often happens.
Due to the nature of plating, this is often seen when the plated parts (e.g. KOOD shaft and KOOD nut) mesh with each other or when the threaded part is greaseless.
Please use an anti-corrosive grease such as sledge compound on the screw part when you install it.