Αποτροπή γρατσουνιών στο σώμα Ενώ υπάρχουν πολλά προϊόντα όπως το Seal, το Stomp Grip είναι ένα RidingSupportGEAR που έχει εξελιχθεί σε λειτουργία Μέρη μείωσης της κόπωσης.
Από το STREET στο Circuit, έχω κερδίσει μεγάλη υποστήριξη σε διάφορες καταστάσεις.
Χρησιμοποιούμε το ιδιόκτητο υλικό Elastomer, ένα ισχυρό συγκολλητικό 3Μ για κόλλες.
Ακόμα και με τη σκηνή Hard Riding, η αρχική δύναμη Grip της Pad διατηρείται χωρίς να μετατοπιστεί.
ΦΤΙΑΓΜΕΝΟ ΣΤΙΣ ΗΠΑ!
Το Stomp Grip υποστηρίζεται από την Top Racer, Tops Tan Rider από διάφορες χώρες σε όλο τον κόσμο.
Το κύκλωμα της Ιαπωνίας, το STREET έλαβε επίσης μεγάλη δημοτικότητα.
Το φαβορί της Stomp Grip αυξάνεται ταχύτατα σε όλο τον κόσμο.
[Πώς να τοποθετήσετε Stomp Grip]
1. Καθαρίστε την επιφάνεια εφαρμογής.
(Εάν χρησιμοποιείτε το [Color] Clear, παρακαλούμε να εργαστείτε μετά την πτώση της βρωμιάς και του νερού να καθαριστεί καθαρά με το Compoundetc.)
2. Απολιπάνετε την επιφάνεια εφαρμογής.
3. Εκτελέστε τοποθέτηση.
4. Παρακαλώ επικολλήστε την άκρη για να μην εισέλθει κανένας αέρας. Παρακαλώ ξεκολλήστε το χαρτί υποστήριξης ενώ το κολλάτε.
(Εάν χρησιμοποιείτε το [Color] Clear, σιγουρευτείτε αργά αργά σιγά-σιγά από την άκρη, μπορείτε να κολλήσετε καθαρά χωρίς είσοδο αέρα.)
Η κόλλα Stomp Grip απαιτεί 24 ώρες πριν η αντοχή της κόλλας γίνει σταθερή.
Για την πλήρη πρόσφυση απαιτούνται 72 ώρες.
Όταν χρησιμοποιείται πριν από την πλήρη συγκόλληση, μπορεί να αποκολληθεί ή μπορεί να μην είναι ευθυγραμμισμένη.
While most of the products are just a sticker to prevent scratches on the body, the Stomp Grip is a riding support gear that has evolved into a functional part to reduce fatigue.
From the street to the circuit, it is highly supported in various situations.
Originally developed elastomer material, strong 3M adhesive is used for the adhesive.
The pad keeps its original gripping power without shifting even in hard riding scenes.
MADE IN THE USA!
Stomp Grip is used by top racers and stunt riders all over the world.
It is very popular in the circuit and the street in Japan.
Stomp Grip users are increasing all over the world.
[stomping on stomp grips]
1. Clean the surface to be applied.
(When using clear, please remove dirt and water stains with compound before starting work)
2. Degrease the surface to be applied.
3. Perform positioning.
4. Apply from the edge so that air does not enter.Peel off the backing paper while pasting.
(If you use a clear sheet, apply it slowly and carefully, taking your time from the edge.It is possible to stick it beautifully without air entering.)
The adhesive of Stomp Grip needs 24 hours to stabilize the adhesive strength.
Full adhesion requires 72 hours.
If you use the product before it is fully bonded, it may peel off or shift.