About quality and texture: I am happy with the quality of the engine reinforced plate from G-Craft. Made from aluminium and machined to allow for high strength and light weight. About the feeling of use: The engine reinforced plate allows for an addition connection between the engine and the frame which leads to a noticable reduced movement and vibration. Products to buy together: A set of steering stem stabilizers from Outex would also be desirable to purchase alongside the engine reinforced plate to also add some reinforcement to the steering. Difficulty of installation: The process to install takes about 20 minutes, position the engine reinforcment plate and install the 4 bolts into the engine followed by the 6 bolts that clamp the plate around the frame. Not difficult to do. Cost performance and comparison with other products: High costing but you are getting a beauitfully designed product made from quality aluminium stock. With there being no other branded product like this there are non to compare. About shipping and packaging: Sea frieght is my preferred method of shipping due to the lower cost and it is fantastic that it has returned as an option once again so I can put my money toward parts and not high shipping costs. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: I see no concerns or cautions to be advised of in regards to this product. If you are looking finely detail your Grom then go for it. View Detail

Very well made, smaller than expected but the results are brilliant. Bike vibrates like a paint shaker as before, but the high frequency numbing vibrations have been dulled/removed from the experience.View Detail

I bought the one for Grom because it is a common Frame, but I bought the one for JB-02MONKEY125. Not available." It was
Looking at the original and the service manual, I found that the obstruction was the part for attaching the plate that holds the exhaust pipe (the part that wraps around the exhaust pipe under the engine) = it is additionally welded to the frame.
However, the above standard installation plate is a simplified version of this product in terms of functionality.
Specifically, there is an approximation in the sense that the two Bolt locations under the Engine (this product has four Bolt locations) are connected to the Frame.
It was also frustrating to put back the OEM parts that we had taken the trouble to remove, so we prepared the following parts for the installation of this product. Vibration Damping Washer M2052 I incorporated it into the return of the M8 and M10 of the +Rear Sets (also incorporated into the Footpeg installation portion of the +Rear Sets).

This product has nothing to do with the footpeg, but it has relieved the vibration of the footpeg, which I was having trouble with! I bought this product for this effect and prepared a vibration suppression washer, but if the product had been installed, the effect would have been even greater. 。 It looks like it cannot be installed without Frame modification.View Detail

I changed to this one because the serviceability is better than NORMAL, and I'm satisfied with the construction.View Detail

he thought that it probably adhered well and bought it A thing is good too. truly, G Craft description is also kind and which die length is where -- etc. -- very kind Since a Clutch cover is different.Naturally, although several are different, they suit almost. It was about three to have bought it with the addition. It was impressed that the plate Screw of the generator was a hexagon socket. Since it licked here, it was saved in that of the method of したっ in the hexagon head.View Detail

About quality and texture, I can confirm that the quality is great and that the material used is steel with a zinc coating.About the feeling of use, Two 28mm long stud bolts were needed for the new engine that I am building from newly purchased part from Honda. They has done their job helping to secure the exhaust pipe flange to the exhaust port on the cylinder head.Products to buy together, To be able to complete a new engine build many newly purchased parts are required to be added to your cart but the two most important to go with the stud bolts are the exhaust pipe gasket and the capped nuts as they all work together on the installation.Difficulty of installation, I can say the fitment of the stud bolt for my installation was very easy due to the ease of access and the process is explained in the service manual which is to be tightened to the required torque value using two jam nuts.Cost performance and comparison with other products, The pricing of this product is great. You receive an original Honda stud bolt that will be suitable for most engine builds and repairs and I do not see this being offered any cheaper elsewhere.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country.Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture, I can confirm that the quality is great and that the material used for the body is a moulded plastic with a stainless steel inner and includes rubber seals on either end.About the feeling of use, This 235cc/min 10 hole fuel injector is an option that will work on a modified Honda Grom engine but may not be the best choice as Kitaco have a good selection.Products to buy together, With the increased fuel comes the need for more air, so a larger throttle body would be ideal to also add to your cart to achieve this.Difficulty of installation, I can say the fitment of the fuel injector assembly for my installation was average due to some panel removal and air box releasing required for better access and having to learn the correct way to disconnect the fuel line as the clip is not intuitive to operate but does fit without any additional parts. Cost performance and comparison with other products, The pricing of this product is good. You receive a high output fuel injector assembly that is made from quality materials but Kitaco you may also want to view the selection available form Kitaco.About shipping and packaging My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country.Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture, I can confirm that the quality is great and that the material used is expanded layers of graphite with a thin smooth sheet metal foil. About the feeling of use, Just one exhaust system gasket is needed for the new engine that I am building from newly purchased part from Honda. It has done it's job to prevent exhaust air leaks from between the cylinder head and the exhaust pipe.Products to buy together, To be able to complete a new engine build many newly purchased parts are required to be added to your cart but the most important to go with the exhaust system gasket is the capped nuts as they maintain the seal between the two parts on the installation.Difficulty of installation, I can say the fitment of the exhaust system gasket for my installation was very easy due to to already having access as the cylinder head is new and no old gasket needed to be removed, simply place in the port.Cost performance and comparison with other products, The pricing of this product is good. You receive an original Honda exhaust system gasket that will be suitable for most engine builds and repairs there are no cheaper options available here.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country.Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture, I can confirm that the quality is great and that the material used is a mixture of plastic and rubber that forms the oil seal.About the feeling of use, Just one of these oil seals is needed for the new engine that I am building from newly purchased part from Honda. It has done its job sealing from any oil leaks from where the transmission output shaft exits the crankcase.Products to buy together, To be able to complete a new engine build many newly purchased parts are required to be added to your cart but the oil seal of a similar design but smaller in size for the gear shift shaft is an important one to remember.Difficulty of installation, I can say the fitment of the oil seal for my installation was easy due to the ease of access and the process is explained in the service manual which requires the oil seal to be tapped into the crankcase.Cost performance and comparison with other products, The pricing of this product is great. You receive an original Honda oil seal that will be suitable for engine builds and repairs, much cheaper then other brands oil seals of this design.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country.Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture, I can confirm that the quality is great and that the material used is PVC (Polyvinyl Chloride) with a smooth gloss finish.About the feeling of use, The Honda monkey sticker looks great on the right side cover, it completes the look of the cover installation and gives the bike that symmetrical look I was after.Products to buy together, If you are a mad fan of Honda monkey bikes like myself then you could also add a monkey helmet from the Honda riding gear range to your cart so you look the part when you're out riding.Difficulty of installation, I can say the fitment of the sticker for my installation was very easy due to the surface being flat and I used a wax and grease remover before the application of the sticker to help the adhesive have the best chance of adhering to the paint.Cost performance and comparison with other products, The pricing of this product is great. You receive a single stricker that is of a good size and great quality from a well known brand. The pricing of other genuine Honda stickers similar to this will be much higher.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail