I bought this for the O/H of the Y's GearKYBFront fork on my MT-09.
It was cheaper than the OEM Product and even better value for money with the Points.
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
ταιριάζει: KAWASAKI Z750 ZR750J [stock number]92093-1472 piece2 [model name]ZR750-J1/ZR750-J2, KAWASAKI Z650 ER650H [Genuine part number]92093-1472 piece2 [Model]ER650HHF/ER650HJF/ER650HKF, KAWASAKI W800 STREET (STREET) EJ800B [stock number]92093-1472 piece 2 [model name]EJ800BKF, KAWASAKI W800 CAFE (Cafe) EJ800B [stock number]92093-1472 piece 2 [model name]EJ800CKF, KAWASAKI VULCAN S (VULCAN400) EN650G [Genuine part number]92093-1472 piece 2 [Model name]EN650GKF/EN650GKFA View more
5 / 5
1 Ανασκόπηση
rating breakdown
5 Stars | 1 | |
---|---|---|
4 Stars | 0 | |
3 Stars | 0 | |
2 Stars | 0 | |
1 Stars | 0 |
I bought this for the O/H of the Y's GearKYBFront fork on my MT-09.
It was cheaper than the OEM Product and even better value for money with the Points.
Fits: HONDA GORILLA Z50J/AB27, HONDA MONKEY Z50J/AB27
I'm planning on doing a lot of fork maintenance on my Honda Monkey. Little by little I collect consumables. I decided to try the anthers from NTB, since a year ago I replaced the anthers with original ones from Honda and they were cracked, I hope this will not happen here. In general, the quality of the products from this manufacturer is quite satisfactory, there are no comments.View Detail
Fits: YAMAHA SEROW225 4JG/1KH/DG08J
[How is it used?
I used it on a SEROW225 WE ForkOverhaul that had an oil leak.
The oil seal is also made by NTB.
The SEROW, which sometimes runs on forest roads and courses, was exposed to a large amount of sand and mud, and it seems that the inside of the Fork Boots was also contaminated.
So I did a quick Overhaul.
How was your experience with it?
It worked just as well as the OEM Dust Seal.
[Points to note]
I think it's important to assemble it carefully and surely and to wash it well.
I want to make it last longer, so it's nice to use Silicon grease and curing when assembling.View Detail
Fits: YAMAHA TRICKER (XG250 TRICKER) DG32J [Genuine Part Number]5JX-23144-00 Quantity 2 [Model Name]XG250 [Type]B8C1, YAMAHA TRICKER (XG250 TRICKER) DG16J [Genuine Part Number]5JX-23144-00 Quantity 2 [Model Name]XG250 [Type]5XTA/5XTB/5XTC, YAMAHA TRICKER (XG250 TRICKER) DG16J [Genuine Part Number]5JX-23144-00 Quantity 2 [Model Name]XG250 [Type]5XT8/5XT9, YAMAHA TRICKER (XG250 TRICKER) DG10J [Genuine Part Number]5JX-23144-00 Qty2 [Model Name]XG250 [Type]5XT2/5XT3/5XT4/5XT5/5XT5/5XT6/5XT7, YAMAHA TRICKER (XG250 TRICKER) DG10J [Genuine Part Number]5JX-23144-00 Quantity 2 [Model Name]XG250 [Type]5XT1
[How is it used?
I used it for Front forkOverhaul of SR400 which I am restoring.
How was your experience with it?
The Spec. is the same as OEM, though it is cheaper than OEM Parts. This kind of Seal will be a standard product.
I use it without anxiety.
I haven't run it yet, but it seems to do the job.
How did it compare to other products?
No different from OEM.
[Points to note]
To prevent Wound by curing with Vinyl when passing through Inner Tube.
To put Silicon grease etc. in Rip.
The basic Point of Fork decomposition is the same, such asView Detail
Fits: YAMAHA TW225 DG09J, YAMAHA TW200 2JL, YAMAHA TW200E DG07J
There was no particular problem, but I found a crack in the Dust Seal, so I replaced it just in case.
It acts like a lid to prevent Garbage from getting inside the Front fork.
I bought this one because it was reasonably priced.
good point
It's cheap.
The texture of Rubber is not so different from OEM.
After installing it, the accuracy of the parts is quite good.
A bad point
The parts themselves are inexpensive, but the fork has to be roasted when replacing them.
It's better to think of it as a Seal exchange as one of Fork's Overhaul rather than a Seal exchange.
Installation is not difficult, but rather tedious and time-consuming.
However, if you replace the front fork (Overhaul), you will get the performance of a new front fork.
If you are a do-it-yourselfer like me, refer to the service manual. Or you can ask a motorcycle shop to do it for you.View Detail
Fits: HONDA Smart・Dio Z4 (SMART DIO) AF63 [Genuine part number]91254-GN1-013 piece2 [Model]SKX50S4/SKX50S5/SKX50S6 [Type]2J/3J, HONDA DREAM50 (DREAM) AC15 [Genuine part number]91254-GN1-013 piece2 [Model]CB50V, HONDA Smart・Dio Z4 (SMART DIO) AF63 [Genuine part number]91254-GN1-013 piece2 [Model]SKX50S7 [Type]2J/3J, HONDA SUPER CUB110 MD (Postal Service) JA43 [Genuine part number]91254-GN1-013 piece2 [Model name]C110BNJ [Type]Y1/Y2/Y3, HONDA SUPER CUB 50 MD (Postal Service) AA08 [stock number]91254-GN1-013 piece2 [model name]C50BNJ [type]YA/YB/YC
I used this product for my DREAM50, some of Universal Product's Dust Seals are hard to fit, but this product was very smooth to install.View Detail
Purchased for regular replacement.
If it were a little cheaper, I could get a stable replacement...View Detail
?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
I purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Grip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
Εξυπηρέτηση πελατών
ΠΑΡΑΓΓΕΛΙΕΣ
ΠΛΗΡΟΦΟΡΙΕΣ
ΣΧΕΤΙΚΑ ΜΕ ΕΜΑΣ
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING