Stroke sensor was installed on Kawasaki ZX-11
I'm only wearing one of them, so I went to another Motorcycle
If you think about it, it's a bargain!
This tool allows you to see how much the Front fork is sunk
I had been using Tie Wrap as a substitute, but I wanted a proper one, so I bought this one
To install the spring, I screwed the spring in, but it didn't work well and I was annoyed Or do
It's good that you don't have to take the Fork apart to install it
I bought it mainly because I wanted to know how much the front fork sinks in the circuit running The stroke sensor is a ring on the inner tube of the front fork at first glance It may seem like it's just a matter of putting it on, but the Tie Wrap could damage the Inner Tube It is recommended to use a strobe sensor to measure the amount of stroke as much as possible because there is Recommendation
Other companies' stroke sensors are called Quantity:Where it sells for 1pc. for 2,600 to nearly 4,000 yen, this product is Quantity:1 Set of 2pcs. will be about 2,000 yen per 1pc The cost performance is overwhelmingly good as it is about However, normally you only need to install it on One Side, so the quantity:2pc. Set won't even have to be in there …
I have both the Established Fork vehicle and the Inverted Front Fork vehicle Inner The size of the tube was 41mm, so I was able to use this one for two tubes It is enough to measure the sinking of the fork
Installation is as simple as fastening a resin sensor with a spring I'm a clumsy handful of people who have to turn and bracket the ends and edges like a screw while wrapping them around the Fork And it may be fiddly (I was pretty fiddly both times)
View Detail
I bought it because it was inexpensive and easy to install in the Stroke sensor that I was looking for I did
It would have been nice to have a black color as well
View Detail
I bought 41Φ at Point
The spring comes off with a screw type and can be installed without removing the front fork, but I removed the front fork and installed it because the spring seemed to stretch
It works fine
It comes in a pack of two, but I'd like to see it sold as one, since it usually goes on One SideView Detail
Sale price $498
I usually only use one, so it's a pretty good deal to have a spare
I think the key is to not pull the Spring too much when you put it on
I'm separate from the Resin Parts (On Inner Tube, the smallest diameter) First, connect the spring and then connect the
After the Spring was connected, I moved it into the groove of the resin partsView Detail
Two for the price, which is cheap I shared it with a friend There is no particular problem with the performance and quality of this product, and as a guide to Fork's setting I put it on It collects some dirt, so I clean it regularlyView Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING