10.53 EUR
(1,724 γιέν)
10.07 EUR
(1,649 γιέν)
(4% OFF)
4 (16 Όλες οι κριτικές)
Very Good
It is enough to consider frequency of use.Removed from the Gold mold of the casting and processed as it is.
However, Chain's Piece packing etc etc. How many times a year do you recommend? This item is recommended for those who can use it by all means.
It is better to buy the famous Manufacturer's Cutter.
Bush-born casting → BALI taking surface by yourself Buffing → Self-made finish
It is particularly recommended for people who can enjoy saying like this.
Reviews For CHERRY Universal Cutter αλυσίδας From Other Webike User
Excellent
Enough for occasional useNot suitable for frequent use
The finish is rough and even looks like it might injure you if you use it with your bare hands
However, if you are an individual Youth and cut a cheap Chain a few times a year at most, it's enough for you There is safer than flying Pin's head off with a Thunder
Cost performance is Number oneView Detail
Average
But for those who only think about CutSeal chain to non-seal (Clip equation) The purchase is only to change the
This Cutter can cut the Chain once, discard the original Chain, and
This is an item for those people
It's cheaper and better if you just want to cut it, but if you want to use it repeatedly
Buy another luxury item
The quality of the Chain Pin extruding rod is poor and the shaft is straight in a blur
Can't press Pin
Probably the bar is only at the lowest level of strength, and if the pin is hard, it will break easily
So, shave the head of the Pin until it is flat before using it
When you say it's worth the price, you can say it's a product that requires a lot of dedication and determination
By the way, the handle is just stuck on the standard screw, so it's not as long as the appropriate length
If you stick a bolt in it and use it as a handle, you can hang a lot of power on it
Most of all, though, Cutter's Stick can't stand up to its powerView Detail
Excellent
Functionality good, Cost goodAs described in the product description, it has a textured finish, probably due to bad casting sand
But it works fine
The ease of use is the same as other high end manufacturers, etc
Then cheap is a good thing! 。View Detail
Excellent
Necessary and sufficientI tried several times to Cut of 520 Chain. I used it after scraping one side of Pin at Grinder once, but it will be free without difficulty. I do not understand the long-term durability, but it is not frequently changing such as Chain and this is enough for AmateurUser like me.
The item was washed and packed in PetitPetit in dry condition and delivered. It seems that improvement that it reaches with covered oil is improving.View Detail
Excellent
If you grasp the available Chain and buy itIf you rotate in Large-sized Wrench, you do not have to cut the head of Chain's Pin in Grinder one by one, you can pull out Pin as it is.
The price is also cheap, so you can work properly enough.
If you are preparing a lot of Motorcycle, some vehicles equipped with Chain that does not fit Cutter will come out, but if you only need your own Motorcycle maintenance, you need the smallest limit.
Let's make it easier to use in Parkari for the time being.View Detail
Most Viewed Reviews Of CHERRY Chains
Excellent
Enough for occasional useNot suitable for frequent use
The finish is rough and even looks like it might injure you if you use it with your bare hands
However, if you are an individual Youth and cut a cheap Chain a few times a year at most, it's enough for you There is safer than flying Pin's head off with a Thunder
Cost performance is Number oneView Detail
Average
But for those who only think about CutSeal chain to non-seal (Clip equation) The purchase is only to change the
This Cutter can cut the Chain once, discard the original Chain, and
This is an item for those people
It's cheaper and better if you just want to cut it, but if you want to use it repeatedly
Buy another luxury item
The quality of the Chain Pin extruding rod is poor and the shaft is straight in a blur
Can't press Pin
Probably the bar is only at the lowest level of strength, and if the pin is hard, it will break easily
So, shave the head of the Pin until it is flat before using it
When you say it's worth the price, you can say it's a product that requires a lot of dedication and determination
By the way, the handle is just stuck on the standard screw, so it's not as long as the appropriate length
If you stick a bolt in it and use it as a handle, you can hang a lot of power on it
Most of all, though, Cutter's Stick can't stand up to its powerView Detail
Excellent
Functionality good, Cost goodAs described in the product description, it has a textured finish, probably due to bad casting sand
But it works fine
The ease of use is the same as other high end manufacturers, etc
Then cheap is a good thing! 。View Detail
Excellent
Necessary and sufficientI tried several times to Cut of 520 Chain. I used it after scraping one side of Pin at Grinder once, but it will be free without difficulty. I do not understand the long-term durability, but it is not frequently changing such as Chain and this is enough for AmateurUser like me.
The item was washed and packed in PetitPetit in dry condition and delivered. It seems that improvement that it reaches with covered oil is improving.View Detail
Excellent
If you grasp the available Chain and buy itIf you rotate in Large-sized Wrench, you do not have to cut the head of Chain's Pin in Grinder one by one, you can pull out Pin as it is.
The price is also cheap, so you can work properly enough.
If you are preparing a lot of Motorcycle, some vehicles equipped with Chain that does not fit Cutter will come out, but if you only need your own Motorcycle maintenance, you need the smallest limit.
Let's make it easier to use in Parkari for the time being.View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING