As I was noticed by NORMAL, it was in a state of toe tipping, so I thought that this would make it better for Rear Sets to do it. But for a moment to try it the price - - - So, first of all from affordable.
The effect was exactly as expected. The feet fit in a natural position. The Point you chose compared to others is a flat surface with price and color, dish Bolt.
The point that you should know before installing is as follows.
- The bending of Brake hose becomes tight
It may be better to think about moving the Reserver tank at the top.
- Expands in the width direction by the thickness of Plate
There seems to be a sense of incompatibility depending on the person, but as for me, it is easier to hold on the heel.
- Brake pedal's angle adjustment range remains NORMAL
There are limits to lowering, so keeping your feet on Pedal may make your ankle painful.
- Possibility of interference between Change Pedal and Side Stand
There is a remedy in Instruction Manual here.
I got the rearset risers as I'm a little on the short side, and could not properly clamp onto the tank with my thighs. Lean angle was not a consideration as I had changed out my pegs and I'm currently dragging my stock pipes so I shouldn't go any lower.Had the brackets installed in 15mins (inclusive of taking photos). Anyone with some basic tools and Google translate will be able to do it.I found there was a vast difference in my seating position. The slightly more rearward position meant my buttocks were touching the rear seat. I have a feeling that may be the proper position to sit based on how nicely my thighs fit into the curves of the fuel tank.Your riding position is a fair bit more aggressive and I'd recommend you work on your core muscles to effectively utilise this new attack position. That said, you can still relax your geometry by riding with your heels on the pegs rather than using the balls of your feet.Until I get a really aggresive pair of clipons, I can imagine myself going longer distances even with this rearset adjuster, but time will tell.The bracket is ABS-compatible, just take note to position the rear master hose out of the way of the airbox/battery box while installing. Test your position, Loctite it and you're good to go.The provided tension rod is sufficient for the stock shifter, but I will have to fabricate/buy a new tension rod for use with my incoming GP-shifter.Remember not to overtighten your bolts onto aluminium.View Detail
Fits: HONDA CBR250R 11- MC41 (1000001-)
Running long distances will make my leg hurt so I tried purchasing things. I did not know the best position so I set it to the second position. Especially troublesome, installation is completed in 10 minutes. It is a nice feeling that the Black color is perfect for Body.
I did not particularly notice the thickness of Plate parts. Since hexagonal Screw fixed to Plate is different from OEM's Size, another hexagon is necessary.
I felt that the price was a little expensive.View Detail
Fits: HONDA CBR250R 11- MC41 (1000001-)
run and the guide-peg position at the time of landing became good.Attachment was also very easy.
In 34 mm of back, the right and the left mmUP(ed) the step position 17 times.The guide-peg position at the time of the
run and the guide-peg position at the time of landing became good.Attachment was also very easy.View Detail
Fits: HONDA CBR250R 11- MC41 (1000001-)
> amount of money to have equipped enough [ comparatively ].Since the guide peg came before halfway [
standard position ], it was effective enough.They are the
price and goods which m
[Webike Monitor] I think that there is a benefit for
> amount of money to have equipped enough [ comparatively ].Since the guide peg came before halfway [
standard position ], it was effective enough.They are the
price and goods which modeling can satisfy enough.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING