Not a lot you can say about handlebars. They look good and seem to be of a high quality, time will tell. However there are a few points worth mentioning. There is a manufacturers sticker where the grip goes, and not making it an easy to remove sticker meant I took about 20 minutes soaking and rubbing the area to remove it.Also the standard bars have a location hole for the left and right switch cluster to stop them rotating. These bars do not so you either drill a hole and hope to get it in the correct position, or remove the locating pin from the switch cluster.
View Detail
- Πώληση
- Instock
21.91 EUR (3,780 γιέν) 22.96 EUR Save 5%
Webike Point: +38 pt
(0.22 EUR)
πληροφορίες αποστολής
In Stock : 2 left, Ships within 24 hours.
Estimated arrival date around
FITMENT
HONDA
-
HORNET250
*Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
-
APE 50
08-12 (drum brake) *Processing of switch holes is required
-
APE 50
-07|08 (Carburetor) *Ape 100 (09-) only, switch hole drilling required
-
APE 100
-12 (drum brakes) *Ape 100 (09-) requires drilling of switch holes
Δείτε όλα
HONDA
YAMAHA
-
SR500
88-00 (CV cab models) *Processing of switch hole required
-
SR400
88-00 (CV cab models) *Processing of switch hole required
-
SR400
01-12 (Carburetor/FI disc brake models) *Processing of switch hole required
-
XJR400R
01-07 (RH02J)*Processing of switch hole drilling required|*Side cap required (for inner diameter 18mm)
Δείτε όλα
YAMAHA
SUZUKI
-
GSX400
05-07 GK7CA *Processing of the switch hole is required|* You can use the normal side cap.
-
ST250 E Type
-07 (NJ4AA)(Carburetor model)*Processing of switch hole required|*You can use normal side cap.
-
ST250
-07 (NJ4AA)(Carburetor model)*Processing of switch hole required|*You can use normal side cap.
-
RV200 VANVAN
-07 NH41A Carburetor *Processing to open switch holes required|* The stock side caps can be used.
Δείτε όλα
SUZUKI
KAWASAKI
-
ZEPHYR750
*Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
-
ZEPHYR400
*Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
-
ZEPHYR1100 RS
*Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
-
ZEPHYR1100
*Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
Δείτε όλα
KAWASAKI
Others
Open Fit Model Information Table
-
Universal
Περιγραφή του προϊόντος κάτω από αυτόματα μετάφραση από την Google.
Product detail
Χρώμα χειρολαβής : Μαύρος
[Προδιαγραφή χειρολαβών]
Χειρολαβή : Χάλυβα, Μαύρη / Εξωτερική Διάμετρος Φ22,2mm / Εσωτερική Διάμετρος Φ18mm
Είναι δυνατή η χρήση καλωδίου STD και εύκαμπτου σωλήνα.
[Μέγεθος τιμονιού]
Συνολικό ύψος : 80mm
Συνολικό πλάτος : 730mm
Κάτοχος τοποθέτησης Μέρος αποτελεσματικό πλάτος : 130mm
Μέγεθος τραβήγματος : 110 mm
Εσωτερική γωνία : 21 μοίρες
Γωνία προθέρμανσης : 85 μοίρες
*
* Χειρολαβή σφιγκτήρα (κάτοχος ή ταχυδρομείο) που εμφανίζονται στην εικόνα δεν περιλαμβάνονται.
* Οι μετρήσεις έγιναν με το προϊόν τοποθετημένο επίπεδο..
Κάντε κλικ για τον κάτοχο χειρολαβής MONKEY
Κάντε κλικ για άλλα χρώματα.
Κανονική λίστα μεγέθους λαβών για μοντέλα δρόμων 7/8 ίντσας.
Κανονική λίστα μεγέθους λαβών για 7/8 αμερικανικά σκούτερ μοντέλο.
Κανονική λίστα μεγέθους χειρολαβής για αμερικανικά μοντέλα 1 ιντσών..
Φτιαγμένο στην Ιαπωνία. Τα πρωτότυπα, οι επιβεβαιώσεις τοποθέτησης και η παραγωγή διαχειρίζονται μέσα στην εταιρεία. Τα προσεκτικά επιλεγμένα υλικά είναι λυγισμένα και συγκολλημένα με μεγάλη ακρίβεια και έχουν τελειώσει με υψηλής ποιότητας λειαντικό τελείωμα βασισμένο στις τεχνικές και τις γνώσεις που έχει αποκτήσει η εταιρεία καθ 'όλη τη διάρκεια των ετών. Το τιμόνι έχει αφοσίωση στην ποιότητα και είναι κατασκευασμένο από χάλυβα STKM13A με αντοχή σε εφελκυσμό. Το μαύρο επιχρωμιωμένο υλικό τελειώνει με ακρυλική διπλή αντιδιαβρωτική επεξεργασία. Αυτό το προϊόν πληροί τα πρότυπα ασφαλείας της JMCA.
Προσοχή
* If there may be an instruction manual included, it will be written in Japanese.
MODEL PAGE LINKS
HONDA
- APE50
- APE50
- MONKEY
- MONKEY
- APE100
- FTR223
- FTR223
- VTR250 (MC33)
- VTR250 (MC33)
- HORNET250 (CB250F)
- CB400SS
- CB400SF (Super Four)
- CB400SF (Super Four)
- CB400SF (Super Four)
- CB400SF (Super Four)
- CB400SF (Super Four)
- CB400SB (Super Bol D'or)
- NC700S
- CB750
- CB1300SF (Super Four)
- CB1300SB (Super Bol D'or, CB1300S)
- CB1300SB (Super Bol D'or, CB1300S)
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
κριτικές πελατών
Reviews with image
Fits:HONDA NC700S 12 (except for ABS and DCT cars) *Processing of switch hole is required|* Required side cap (for 18mm diameter), HONDA VTR250 03-07 MC33 (1020001-)*Processing of switch hole required|* Required side cap (for 18mm ID), HONDA VTR250 09-12 MC33 (1300001-)*Processing of switch hole drilling required|*Side cap required(For inner diameter 18mm), HONDA APE 100 -12 (drum brakes) *Ape 100 (09-) requires drilling of switch holes, HONDA APE 50 -07|08 (Carburetor) *Ape 100 (09-) only
Fits:HONDA NC700S 12 (except for ABS and DCT cars) *Processing of switch hole is required|* Required side cap (for 18mm diameter), HONDA VTR250 03-07 MC33 (1020001-)*Processing of switch hole required|* Required side cap (for 18mm ID), HONDA VTR250 09-12 MC33 (1300001-)*Processing of switch hole drilling required|*Side cap required(For inner diameter 18mm), HONDA APE 100 -12 (drum brakes) *Ape 100 (09-) requires drilling of switch holes, HONDA APE 50 -07|08 (Carburetor) *Ape 100 (09-) only
Mar 3, 2022
I replaced Handlebar to immeChain.
The height of the handlebar is now much lower.
It's so much easier to ride.
Helpful?
Fits:HONDA NC700S 12 (except for ABS and DCT cars) *Processing of switch hole is required|* Required side cap (for 18mm diameter), HONDA VTR250 03-07 MC33 (1020001-)*Processing of switch hole required|* Required side cap (for 18mm ID), HONDA VTR250 09-12 MC33 (1300001-)*Processing of switch hole drilling required|*Side cap required(For inner diameter 18mm), HONDA APE 100 -12 (drum brakes) *Ape 100 (09-) requires drilling of switch holes, HONDA APE 50 -07|08 (Carburetor) *Ape 100 (09-) only
Feb 23, 2021
这个车把比原厂的车把窄了不少，另外，原厂的那个车把真得好重，这个则要轻很多。然后这个车把他不像原厂的车把有往回弯的那样，所以整个骑行的姿势会往前稍稍前倾一些，而原来的姿势是直直的坐着，相比较而言我还是更喜欢这个姿势，腰部会更舒服一些。车把短了有一些别的问题，national cycle的这个挡风适配不如原来的车把好了。----------------------------------------------The handlebar is narrower than a lot of the original handlebar, in addition, that the original handlebar really well heavy, this will have a lot of light. Then the handlebar He does not have that back the original handlebar bend, the entire riding posture will move forward slightly forward for some, but the original posture is sitting straight, comparatively speaking I prefer this position, the waist will be more comfortable. There are some other short handlebar problems, national cycle of the wind adapted better to the original handlebar good.Powered by Google Translator
View DetailHelpful?
Fits:HONDA NC700S 12 (except for ABS and DCT cars) *Processing of switch hole is required|* Required side cap (for 18mm diameter), HONDA VTR250 03-07 MC33 (1020001-)*Processing of switch hole required|* Required side cap (for 18mm ID), HONDA VTR250 09-12 MC33 (1300001-)*Processing of switch hole drilling required|*Side cap required(For inner diameter 18mm), HONDA APE 100 -12 (drum brakes) *Ape 100 (09-) requires drilling of switch holes, HONDA APE 50 -07|08 (Carburetor) *Ape 100 (09-) only
Jun 1, 2019
Качественный, красивый руль. Установил его вместо оригинального. Очень удобный для меня по сравнению с оригинальным. Удобнее посадка, легче и комфортней управлять байком. Минусы немного шире оригинала, тяжелее. Очень понравился руль. Рекомендую.Quality, beautiful steering wheel. Installed it instead of the original. Very convenient for me compared to the original. Comfortable fit, easier and more comfortable to drive a bike. Cons a little wider than the original, heavier. Loved the steering wheel. Recommend.translated by Google Translator
View DetailHelpful?
Fits:HONDA NC700S 12 (except for ABS and DCT cars) *Processing of switch hole is required|* Required side cap (for 18mm diameter), HONDA VTR250 03-07 MC33 (1020001-)*Processing of switch hole required|* Required side cap (for 18mm ID), HONDA VTR250 09-12 MC33 (1300001-)*Processing of switch hole drilling required|*Side cap required(For inner diameter 18mm), HONDA APE 100 -12 (drum brakes) *Ape 100 (09-) requires drilling of switch holes, HONDA APE 50 -07|08 (Carburetor) *Ape 100 (09-) only
Dec 13, 2018
I'm putting it on my SR
I was looking for something a little lower and wider than NORMAL and decided on these
I was a little concerned about the width, so I cut the ends by 1cm on each end and rode it
I've been using it for a long time and I love the texture
Helpful?
New Custom Articles
