Μοτοσικλέτα κάλυψη Bond [KIZUNA]

We park outdoors uncovered, so the Cover is doubled up.
I chose this product to replace the second layer with a cheaper Cover for the first layer.
I have a Motorcycle with Visor and Club bar installed and the size LL is just right for me as it completely hides the Tire.
There are holes on the front and back for inserting lock wires, etc. The front is yellow and the back is black, so it is easy to distinguish when hanging covers.
There are also vents, which may help prevent moisture and entraining winds.
The fabric also feels firm.

There is also a Belt in the Center, but it does not prevent flapping. This is the same for all Covers. It is better to use separate belts at the front, rear, and center to prevent slamming. You can buy three 2-meter long belts at Home center for about 1,000 yen.

I think I will REPEAT it when it deteriorates and the opportunity to replace it presents itself.

This is an excellent motorcycle cover. Very durable material which is at least twice the thickness of any other I have seen. Plus with the added holes for putting a chain through the wheels. Highly recommend.

[How is it used?
I used it on my XSR700.
The LL was just right with no Back or Box on it.
If you have a Box, I think it's better to have a Box.

Was the one you received as per Image?
I wanted an aperture at the hem.
It has Rubber in it to prevent flapping, but the Rubber is only in the Tire part, so you can't squeeze it all the way.
I'd like to see a cord around the whole thing, and if it could be squeezed, it would prevent it from flapping around more.

How was your experience with it?
It seems to have the minimum functions of Motorcycle Cover.
I think the fabric is good because it is solid.
Also, the seam doesn't go up, so it's not likely to leak water droplets.
Durability is unknown.
There are holes in the front and rear for the motorcycle locks.

[Points to note]
None in particular.

How did it compare to other products?
Although the top MODEL was scratch prevention in the back hair over 2 man of Hirayama Sangyo
This is not becoming.

Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer

I was looking for the same one I used before, but I didn't know the Manufacturer's name and it was different. I found Hirayama products when I was looking for something again after a year of buying it and it was falling apart. The texture and durability are perfect.

The same Hirayama that was torn by a direct hit by Typhoon No. 15 the other day (it was naturally torn because it had deteriorated after two and a half years of outdoor use) It is an alternative to the industrial flameproof Motorcycle CoverF-1
When I tried to Repeat the previous generation MODEL, it had been discontinued, so this MODEL was Purchased
The position of sewing has been changed from the previous generation because the pattern of the fabric has been changed
It can be seen as a reduction in cost by simplifying the sewing process
While the size feel is almost identical to its predecessor, the dimensions of the details have changed and my Motorcycle ( (ZX10R-2017) is a change for the better for it
However, the position of the strap that turns to the lower part of the body has been changed to a very low position, which makes it difficult to use I am
The fabric has been changed from the previous generation "Fireproof name has been removed I don't think there is any arson because it was used in the bicycle parking lot on the Apartment property where it was not seen by an unspecified number of people However, depending on where it is stored, this could be a cause for concern
And the biggest change to the Largest is that the fabric is somewhat thinner than its predecessor
It's a clear de-tune in terms of sturdiness and a real price increase
For me, I think it would have been better to raise the price and continue production of the existing spec
It's still new so it's highly water-resistant, but it won't be able to absorb water as it degrades over time I'm aware of that
The previous one was torn by a typhoon storm due to deterioration of the fabric (fibers) caused by UV rays But I expect it to last a little over two years of the same etc

The reason why the rubber strap is spun in this picture is to reduce the floppy effect by wind Although there are some, a stray cat once crawled into Cover and used Space on Seat as a bed I had a problem with it, and the solution is Main
Unless you're in a place where there are no feral cats and you're exposed to very strong winds, you don't need these measures I think
Others, locking with an abs wire lock using the front and rear locking holes It also serves as an anti-Floppy measure for Cover in

By the way, what I don't like most about this product is its Naming
The bond This is a word that was used so often by Media after the earthquake that it was very important to me It has become a negative impression
To be honest, I hated Naming so much that I even considered buying another product
However, there were no products in the same price range that surpassed Hirayama Sangyo's products, so it was an unavoidable choice This is the reality